Product Description
5515 - P1100 Rotary Vane Coolant PumpFor Welding Water CoolersReplaces Procon 101A100F11BC / 101B100F11BCWeldcraft® 5515 - Abicor-Binzel® BWC-0002 Best Welds® BW1100 - CM Ind® 680-30-067 Dynaflux® #P1100 - Miller® Coolmate - Tweco® 9-6164HS Code 8413.60.0020 Specs: Pressure 60-100 PSI, 60 GPH Water Cooler Pump 5515 P1100 vane type, Suited for use with Bernard, Best Welds, Binzel, Miller, ITW, Weldcraft & Dynaflux systems
Replacement Strainer / Filter: Miller 146249 ESAB 19972 Dynaflux 22227 Filter Strainer Here's an important maintenance tip!Welding equipment coolers using a Vane type pump with a built-in strainer can tell you a lot. Remove the retaining cap and take out the stainless-steel strainer. ** If you find deposits or debris in the strainer it can be a sign of trouble.Debris may be the results of deterioration of weld cables, torches or hoses or contamination from lime or other minerals in the coolant. ** Drain and flush the cooler and lines. Check for damaged or soft cables and hoses. ** Replace coolants with approved products. This simple, low-cost maintenance can save you from Expensive Down Time and equipment failure.
Procon Pumps manufacturers many different kinds of rotary vane pumps in many different configurations and has done so since early 1950’s. If you need to transfer liquids quickly and efficiently Procon makes six different styles of pumps with flow rates ranging from 15 to 660 gallons per hour.
Built with either brass or stainless-steel pump configurations and they can pump a variety of different solutions from pesticides to purified reverse osmosis water. Procon pumps are known for running quietly with reduced noise and vibration. Their pumps are known for being very long-lasting and virtually maintenance free even when pumping low lubricating fluids at relatively high pressures. Most of their pumps are self-priming in design and have built in bypass valves.
